Skip to main content

Cord 812 Custom Beverly restoration story

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
11 Nov 2023 17:31 #47969 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
New casting fundry for the interior door handles and work on the front seat

   

 
 
 
 

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
21 Oct 2023 12:22 #47860 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Also looking for the reference (number) of bearing on the top of the steering column.

Please Log in or Create an account to join the conversation.

  • mikespeed35
  • Offline
  • ACD Club Life Member
  • Registered
More
19 Oct 2023 02:01 #47845 by mikespeed35
Replied by mikespeed35 on topic Cord 812 Custom Beverly restoration story
Glad to hear from you Rudy.
CORDially Mike

Mike Huffman
The following user(s) said Thank You: RubyDS

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
18 Oct 2023 20:37 #47843 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Many thanks Terry 

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
18 Oct 2023 19:41 - 18 Oct 2023 20:09 #47842 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
The drawing is being scanned and copied for two other members restoring sedans. I will send an email to your home address.
You have done a remarkable restoration. I saw how the rusty wreck was brought back to life with your incredible skills and dedication.
Attached are two pictures showing how the rods were shaped and the last picture shows my original used drawing. A lot of nails were used to form the rods around.


 

T cockerell
Last edit: 18 Oct 2023 20:09 by Terry Cockerell. Reason: Adding Pictures
The following user(s) said Thank You: 1748 S, RubyDS

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
18 Oct 2023 16:36 #47841 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Yes Terry ,i'm interested bye a drawing of the ribs used on your car,i have a difference of lengt on the custom model but it's not a problem

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
18 Oct 2023 10:38 #47839 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
Rudy, I thought they were missing. In the picture showing the headlining above the rear window the piping is wrinkled and not smooth.
See the picture showing my headlining. All of the piping runs with smooth curves across the roof.
I have a drawing of the ribs that were used in my Westchester which I can send a copy of.



 

T cockerell

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
18 Oct 2023 08:59 #47837 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
No Terry,i have not steel ribs.
 

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
18 Oct 2023 01:37 #47836 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
Do you have the steel ribs or wires that pass through the headlining??
The wires pass through the piping stitched between the headlining panels.
See the attached sketch.

T cockerell
The following user(s) said Thank You: 1748 S

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
15 Oct 2023 20:33 #47831 by RubyDS

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
15 Oct 2023 20:30 #47830 by RubyDS

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
15 Oct 2023 20:25 #47829 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Work continues with the upholstery,home made of course.

Please Log in or Create an account to join the conversation.

  • mikespeed35
  • Offline
  • ACD Club Life Member
  • Registered
More
12 Nov 2022 05:12 #46396 by mikespeed35
Replied by mikespeed35 on topic Cord 812 Custom Beverly restoration story
Glad to hear from you again Rudy. I like the Coupe.
CORDially Mike

Mike Huffman
The following user(s) said Thank You: RubyDS

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
08 Nov 2022 20:50 #46368 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
still looking for this parts for bustle back trunk

 

Please Log in or Create an account to join the conversation.

  • JIM.OBRIEN
  • Offline
  • Premium Member
  • Registered
More
08 Nov 2022 14:54 #46367 by JIM.OBRIEN
Replied by JIM.OBRIEN on topic Cord 812 Custom Beverly restoration story
Curt,
Cord used cloth covered wiring just like everyone else in the 30's. The plastic insulated wiring didn't come in till much later.
Jim
The following user(s) said Thank You: 1748 S

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
07 Nov 2022 21:01 #46365 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Yes Terry,i have make the Gear change wiring loom in one piece 

Please Log in or Create an account to join the conversation.

  • Curt Schulze
  • Offline
  • Moderator
  • Registered
More
07 Nov 2022 20:59 #46364 by Curt Schulze
Replied by Curt Schulze on topic Cord 812 Custom Beverly restoration story
Did Cord use plastic coated wire? All of my Auburns used colored cloth covered wiring.

The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
07 Nov 2022 20:35 #46363 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
Instead of making your own wiring looms you can buy all of the correct wiring looms from Rhode Island Wiring Services. The gear change loom can be ordered in one piece instead of the two original pieces with the ten pin plug connection. You can make up a dummy ten pin plug from aluminium bar and just pass the cable through it.


T cockerell

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
07 Nov 2022 18:12 - 07 Nov 2022 18:13 #46362 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
After a "short" break to restore my 1934 Airflow coupe ,i'm working on my 812 Cord
Now it's time to electricity and the bumper chromed are arrived today.

 

 

 

 

 
Last edit: 07 Nov 2022 18:13 by RubyDS.

Please Log in or Create an account to join the conversation.

  • johnmereness
  • Offline
  • Moderator
  • Registered
More
10 May 2021 18:18 #43113 by johnmereness
Replied by johnmereness on topic Cord 812 Custom Beverly restoration story

JMM
The following user(s) said Thank You: RubyDS

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
04 May 2021 07:02 #43040 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
More job on brake and fuel tank ,the end is coming soon :silly:

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
04 May 2021 07:00 #43039 by RubyDS
The following user(s) said Thank You: alsancle

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
04 May 2021 06:56 #43038 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
still looking parts to finished my 812 restoration

for the trunk stand if it's possible to have a template or dimension i can reproduce this part

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
04 May 2021 06:55 #43037 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
many thanks Terry

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
26 Jan 2021 04:54 #42026 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
Rudy it looks fabulous compared to what you started with. You have done a wonderful job with every step.
Try AC Parts in Kansas or Doug Pray in Oklahoma for the missing parts.

T cockerell
The following user(s) said Thank You: RubyDS

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
25 Jan 2021 21:10 #42025 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
For finished the restoration of my 812 and for the 810 of my friend i'm looking for some parts

one original radiator cap
one tailight glass "cobro" and the clip around the glass
one camshaft nut for the generator pulley
one glass for the rear licence plate light
and the trunk stand (not sure of the correct name) for bustle back model.
Attachments:

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
25 Jan 2021 21:03 - 25 Jan 2021 21:04 #42023 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Hood painted




Whith another 810 in workshop
Attachments:
Last edit: 25 Jan 2021 21:04 by RubyDS.

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
25 Jan 2021 21:00 #42022 by RubyDS
Attachments:

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
25 Jan 2021 20:57 - 25 Jan 2021 20:58 #42021 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Exhaust system finished
.
Attachments:
Last edit: 25 Jan 2021 20:58 by RubyDS.

Please Log in or Create an account to join the conversation.

  • johnmereness
  • Offline
  • Moderator
  • Registered
More
08 Jul 2020 14:44 #40481 by johnmereness
Replied by johnmereness on topic Cord 812 Custom Beverly restoration story
Yes, I have seen a lot of mice destroyed/damaged interiors via battery box covers being left off, windows rolled down, and also not per se in Cords, but there are various other holes in bottoms of cars for such as seat venting, wiring, sheet metal design, and ....

Packard's seem to have some sort of express highway from under the car to the headliner - mice must be taught about it as children and put on a quest to find the cars.

I recall taking out a 5 gallon garbage can of mice nests out of a Stutz (and it looked just fine with no interior damage other than car smelled bad and owners had been using it that way) - I was super careful too when cleaning it (known a few people that became sick and had weeks to months of problems from getting into mice nests in cars). The Stutz moved on - not what I want to own in a car (especially on a damp day).

JMM

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
05 Jul 2020 05:32 #40467 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
John, I suppose the simplest remedy is to keep the windows wound up when not in use. Another problem are mice, they tend to make homes in the headlining unless the battery box cover is in place. We need to take certain precautions when putting our cars away for safe keeping.
My original headlining had certainly faded but it was mostly out of the direct sunlight for 80 plus years. Recently while removing the seat coverings which were done in the mid 1970s we found the original material behind the front seat was in quite good condition. I suppose we can live with some fading and hope it will be uniform. The best part is owning one , driving it and sharing it.

T cockerell
The following user(s) said Thank You: 1748 S

Please Log in or Create an account to join the conversation.

  • johnmereness
  • Offline
  • Moderator
  • Registered
More
04 Jul 2020 15:51 #40466 by johnmereness
Replied by johnmereness on topic Cord 812 Custom Beverly restoration story
Two things to consider with woolen broadcloth - blues (an such as reds and ....) seem to have a tendency to fade quickly (or are more noticeable as to fading), so ask what the manufacturer's thoughts regarding fading and the second is the moths like wool, so the car will always need to be moth balled and the smell is not the best. Unfortunately, there are not any suitable alternatives even in the commercial space - sort of a "dammed if I do and dammed if I don't" issue.

JMM

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
04 Jul 2020 15:29 #40465 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story

Terry Cockerell wrote: The same colour as my Cord interior.
Have a look at my posting in Restoration Tips for the broadcloth manufacturer J & S Taylor in the UK. Nigel will look after you.



Thanks Terry for the adrees in uk

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
03 Jul 2020 22:49 #40464 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
The same colour as my Cord interior.
Have a look at my posting in Restoration Tips for the broadcloth manufacturer J & S Taylor in the UK. Nigel will look after you.

T cockerell
The following user(s) said Thank You: 1748 S

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
03 Jul 2020 15:35 #40463 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story

Terry Cockerell wrote: Rudy what sort of interior are you planning on fitting, woollen broadcloth or leather?



For interior woollen broadcloth in genava blue.

Please Log in or Create an account to join the conversation.

  • Curt Schulze
  • Offline
  • Moderator
  • Registered
More
03 Jul 2020 13:16 #40462 by Curt Schulze
Replied by Curt Schulze on topic Cord 812 Custom Beverly restoration story
I don't believe Dallas Winslow reproduced parts, particularly something that would have a die that size. He has his hands full with Graham and ACD parts.

The bitterness of poor quality remains long after the sweetness of low price is forgotten.
Be of Good Cheer
Curt

Please Log in or Create an account to join the conversation.

  • 1748 S
  • Offline
  • Platinum Member
  • Registered
More
03 Jul 2020 04:43 #40460 by 1748 S
Replied by 1748 S on topic Cord 812 Custom Beverly restoration story
Terry, I have a complete set of these non vented hub caps. They appear to never have been installed and not chromed. They are in great shape. Been told they are the Winslow covers but does anyone really know???


Gary Parsons

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
03 Jul 2020 00:01 #40457 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
Rudy what sort of interior are you planning on fitting, woollen broadcloth or leather?

T cockerell

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
02 Jul 2020 21:00 - 02 Jul 2020 21:02 #40456 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
The hub caps fitted appear to have been made in the early 1950s but I am not sure by who, maybe Dallas Winslow? My Cord had a set as shown in the attached picture which was taken in Auburn in 1957 with Gordon Buehrig .
This is one of best pictures.
I believe running with these hub caps is not such a good idea . The holes in the production hub caps helped to cool the brakes.

T cockerell
Last edit: 02 Jul 2020 21:02 by Terry Cockerell. Reason: Adding picture
The following user(s) said Thank You: Jonathan Richards, johnmereness

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
02 Jul 2020 07:03 - 02 Jul 2020 19:35 #40455 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
John,i like this hubcaps so look different but beautiful,i have a set of standard hubcaps but in poor condition.

Terry, i hope finished next year ,i still have a lot of work
Last edit: 02 Jul 2020 19:35 by RubyDS.
The following user(s) said Thank You: johnmereness

Please Log in or Create an account to join the conversation.

  • Terry Cockerell
  • Offline
  • Elite Member
  • Registered
More
29 Jun 2020 20:30 #40446 by Terry Cockerell
Replied by Terry Cockerell on topic Cord 812 Custom Beverly restoration story
Rudy it is truly amazing what you have been able to do with this Cord. When do you expect to finish it?
My Westchester was a complete and drive-able car when I started the restoration. That was 5 1/2 years ago. I hope to have it finished in around 6 months. You are certainly a dedicated and very talented man. Well done!

T cockerell

Please Log in or Create an account to join the conversation.

  • johnmereness
  • Offline
  • Moderator
  • Registered
More
29 Jun 2020 16:55 #40445 by johnmereness
Replied by johnmereness on topic Cord 812 Custom Beverly restoration story
I like your hubcaps - different than the norm, though great Art Deco look as well

JMM

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
28 Jun 2020 21:46 - 28 Jun 2020 21:52 #40439 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Attachments:
Last edit: 28 Jun 2020 21:52 by RubyDS.

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
28 Jun 2020 18:06 #40437 by RubyDS

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
28 Jun 2020 18:05 - 28 Jun 2020 21:50 #40436 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
and i make the exhaust manifold





Last edit: 28 Jun 2020 21:50 by RubyDS.

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
28 Jun 2020 18:01 #40435 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Re assembly continue

Please Log in or Create an account to join the conversation.

  • katesmith1304
  • Offline
  • Junior Member
  • Registered
More
18 Apr 2020 12:40 - 24 Apr 2020 22:15 #39971 by katesmith1304
Replied by katesmith1304 on topic Cord 812 Custom Beverly restoration story
this seems interesting VidMateapp.info 9Appsapk.me
Last edit: 24 Apr 2020 22:15 by katesmith1304.

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
16 Apr 2020 17:54 #39961 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
and details

Attachments:

Please Log in or Create an account to join the conversation.

  • RubyDS
  • Topic Author
  • Offline
  • Moderator
  • Registered
More
16 Apr 2020 17:52 #39960 by RubyDS
Replied by RubyDS on topic Cord 812 Custom Beverly restoration story
Progress on water pump in bad condition,only the housing is original,rest is all new home made

Attachments:

Please Log in or Create an account to join the conversation.

  • JIM.OBRIEN
  • Offline
  • Premium Member
  • Registered
More
19 Mar 2020 12:30 #39762 by JIM.OBRIEN
Replied by JIM.OBRIEN on topic Cord 812 Custom Beverly restoration story
MIke, This is not a problem on the Cord 810/812 since there should be two points that limit the drop of the wheel. There is a bumper on the stub frame that stops the swing arm (and crushes the rubber) and then there is the safety hangers on the springs. If I am going to be running the wheels when up on jack stands I have a set of stands under the trailing arms so they are in the normal position.
The following user(s) said Thank You: 1748 S

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum