Pitman arm for 31 Auburn

As was mine, In fact , it had worn enough that the drag link had cut a groove in the neck right before the ball.
Rare Parts was able to rebuild the pitman arm and supply  ball studs to rebuild the tie rod ends.
I can't remember what they charged as it was quite a while back , probably will look reasonable in hindsight!

Brad

The ball is worn on the sides

Having never seen an Auburn pitman arm my belief  is the bend in the end is correct. The splines appear fine. Lets see what the experts have to say.


Gary Parsons

Here’s the pics. 

Post a pic of it; I may have 1.
Pete

Rare Parts repaired mine, not cheap but I think your options are limited!
They seem to know what they are doing.
www.rareparts.com/

Brad
 

Hello I’m looking for a pitman arm for my 31 sedan.  Or is there a way to repair it.   Appreciate any help.